INTEROC Add-On Drilling System BAS 2200
The INTEROC Add-On Drilling System BAS 2200 is currently unavailable. For alternatives, view our entire line of Traxxon Drilling Products.
The add-on drilling system BAS 2200 as an attachment for excavators is a perfect high-performance solution for all types of drilling tasks:
- Overburden drilling with rotary head (Duplex)
- Percussion drilling with hydraulic drifter
The BAS 2200 is suitable for fitting to heavy-duty excavators. The rapid-change device allows a quick and efficient change. The kinematic functions of the BAS 2200 are specially matched to the stick boom of the excavator and allow precise and quick set up for bore holes in high-level positions, as well as for working below ground level and under crowded conditions. High performance hydraulic drifters, rotary heads and double head drilling units are used as attachments.
Cable & Radio Remote Control Systems
The add-on drilling system is equipped with a modern cable and radio remote control, which allows the best view on the working area. The cable and radio remote control was specially designed for continuous service under extreme conditions. The use of digital and proportional control technology allows millimetre precisely, quick positioning of the drilling attachment.
|Maximum Length||6,300 mm|
|Maximum Width without Magazine||1,100 mm|
|Maximum Height||2,550 mm|
|Weight without Attachment||3,800 kg|
|Transport Dimensions with Transport Frame:|
|Width without Rod Changer||1,500 mm|
|Rod Length Information:|
|Maximum Rod Length with Single Drive||3,000 mm|
|Maximum Rod Length with Double Head Drilling Unit||2,0000 mm|
|Slewing Range Inclince Cylinder||+/- 20 Degrees|
|Cylinder Feed Force||35 kN|
|Cylinder Retraction Force||70 kN|
|Required Oil Pressure||23 MPa|